| These days more and more people are opting for | | | | that it works properly. Consider running the wire |
| wireless home security systems. These tend to be | | | | through the wall by drilling holes behind the control |
| less expensive than hard wired versions and they are | | | | panel and below the outlet. This will prevent anyone |
| more versatile. A wired home security system is | | | | from easily tampering or dismantling your system by |
| perfect for those who are good with home projects | | | | pulling out the plug. If you are installing a wireless |
| and DIY or Do It Yourself affairs. | | | | home security system with monitoring, you also need |
| To install a wireless security system, you will need a | | | | to connect the panel to a phone line; here, you may |
| few basic tools and your wireless home security kit | | | | require help from an expert technician. |
| which typically comes with the main control module, | | | | Next install the window sensors and glass break |
| window and door sensors, motion sensors and a | | | | alarms. Install sensors on the main entry doors to |
| siren. | | | | your home. Each sensor usually consists of a magnet |
| The first thing you need to do is to plan. You have | | | | and a transmitter; the transmitter is attached to the |
| to figure out where to put the control panel. It | | | | edge of the window or door while you should make |
| should be placed in a central location with easy | | | | sure that the magnet is attached to the window or |
| access. It should be near an outlet, but away from | | | | door. Consider putting a sensor on the garage door |
| any appliances and fixtures that could block radio | | | | and the entry door to the garage-many thieves gain |
| frequencies, e.g. TV's, stereos, and microwave ovens. | | | | access to homes via the garage door. If you are |
| Many people choose to place the control panel next | | | | installing infrared sensors, smoke detectors, etc, |
| to the door, as a matter of convenience. Do be sure | | | | carefully read the instructions and install them with |
| that wherever you do choose to install the panel that | | | | caution. |
| it is not easily visible from the outside, i.e. away from | | | | Next consult the directions for programming the dials |
| windows as you don't want burglars scoping out your | | | | on the siren. Usually, you can use a tab or |
| home security system before hand. | | | | screwdriver for setting your own home security |
| Next, figure out where you want to install your | | | | code. Again, you'll need to read the instructions to |
| security sensors. Also, choose a place to put your | | | | properly program the control panel. |
| alarm siren; it shouldn't be placed in an obvious area, | | | | The last step is to test the system. Make sure the |
| but still, make sure it won't be muffled or blocked in | | | | alarm works properly and that you can hear it. Make |
| some way. | | | | sure the sensors are up and working without a hitch. |
| Once you've finished your planning you can go ahead | | | | Calibrate the components and make sure the signal |
| and install the main home security panel. This should | | | | strength is adequate. Consult the directions for extra |
| be installed at a comfortable height and remember | | | | help. |
| you need an outlet nearby to connect the system so | | | | |