Installing DIY Intruder Alarm Systems

When it comes to you installing DIY intruder alarmdetectors which can be calibrated so that when your
systems in your own home, there are a number ofpets are moving around the home they will not cause
different things that you need to consider beforethe alarm to be triggered.
you actually start the installation.3. All systems should come with a good control panel
On average people who have not had an alarmand keypad system. The control panel should be able
system fitted to their homes are three times as likelyto interpret what is happening and respond
to have their homes broken into. But even so thereaccordingly to any signals being sent through to it by
are going to be occasions when a person forgets tothe various detectors and sensors you have installed.
alarm their system and this will then provide a burglarMeanwhile the keypad should be small and be easy
with an opportunity to access it. Yet a home which isto understand and manage. It is better if you choose
fitted with an alarm system whether installeda system where the control panel is hidden out of
professionally or by the home owner is more likely tosight (say in a cupboard).
deter a burglar than a home that isn't.A burglar is more likely to give up trying to break into
When looking for a good quality intruder alarmyour home if he finds that his entry is going to be
system to install in your home yourself there aredelayed even if by just a few minutes. So replacing
certain items that you should be looking for in it.the doors and putting good locks on them and the
Below we take a look at just what some of thesewindows is a great deterrent to many burglars.
are.However the most important thing you need to
1. A good set of perimeter sensors which can beconsider before installing DIY intruder alarm systems
attached to doors and windows as these are oftento your home is where you will be locating all the
the first points of entry for any would be burglar toequipment that you have been provided with. So
gain access to a property. Today you can either aspend some time walking around your home and
traditional system (using cables) or you can go for adeciding the best locations for the door and window
wireless one.sensors as well as any motion detectors you are
2. If you can, also look for a system which has someinstalling. Also look closely at the position where you
motion detectors as part of the package. Generallywill be placing the control panel and the keypad for
these will be located in the main rooms of the housearming/disarming the system as you come and go
such as the living and kitchen. However if you happenfrom your property.
to have pets you need to look for those motionCopyright, 2008. Sandra Wilson burglaralarmnotes.